PLASMOLIFTING™ CENTRIFUGE XC 2000
Plasmolifting Centrifuge XC 2000 is a machine used in PRP (platelet-rich plasma) preparation. Rotating at a constant speed of 4000rpm, it balances out the weight of centrifuge tubes. It is recommended to run the device for five minutes. Plasmolifting Centrifuge XC 2000 works on a simple principle of centrifugal force. When subjected to centrifugal force, the plasma will be separated into five different layers (including platelet-poor plasma or PPP, PRP, leuco-platelet layer, the red fraction and separating gel). Plasmolifting Centrifuge XC 2000 comes with a fixed angle rotor, and requires 220v to operate. If a basculating centrifuge is used, the relative centrifugal force (RCF) should be calculated using a special formula (provided in the accompanying documents). To use Plasmolifting Centrifuge XC 2000, put the tube support in the device. Then, insert the specimen tubes. On the opposite side of the device, put in the same number of tubes (ideally, all tubes should contain similar amount of content). This helps prevent Plasmolifting Centrifuge XC 2000 from shaking (and ensure that the spinning movement is smooth). Make sure that the tubes are properly sealed, and fit snugly into the tube holder (use the soft foam supplied as needed). Using the one-touch switch panel, manually adjust the time and speed settings. Alternatively, use the memory function to run the previous program. To begin the centrifuging process, press the start button. Wait for the device to stop completely before moving the specimens. Plasmolifting Incubator Mini B 100 is a product of an Italy- based company called Industrie Biomediche e Farmaceutiche. This device is intended for professional use only. Read the user guide enclosed prior to use.
- One Plasmolifting Centrifuge XC 2000
- User’s manual
- Soft foam
Benefits of Plasmolifting Centrifuge XC 2000
Effectively balances the weight of the tubes
Helps separate the plasma into several layers in just five minutes
Incorporated with a one-touch switch panel
Comes with a soft foam (to help the tubes fit into the holder)
Has a memory setting (able to run the previous program)
How long do the result last for?
Autologous gel or Plasmogel is thermally processed PRP that can stay in tissues for three months. For more durable results, Plasmolifting treatment can be repeated two weeks after the first treatment. Combining PRP injections and Plasmogel may increase the duration of effects.